hpc-7242 2u rackmount chassis for atx motherboard with 4 hot-swap sas/sata hdd trays and rps ? supports atx motherboard with dual processors ? four shock-resistant hot-swap disk trays supporting 3.5" or 2.5" sas/sata drives for raid 5/10 application, one slim odd, and two 2.5" internal drives ? dual front usb 3.0 ports ? supports 80plus single or redundant power supply up to 700w ? front-accessible system fan without opening top cover for easy maintenance ? led indicators and audible alarm notifcation for system fault detection ? built-in intelligent system module enabling whole system fan control and remote manageability specifcations drive bay external internal slim optical drive 1 - 2.5" - 2 hot swap 4 sas/sata hdds cooling fan 1 (8 cm/47cfm) + 2 (6 cm/28cfm) for sas/sata storage unit air filter yes front i/o interface usb 3.0* 2 miscellaneous led indicators power, hdd, temperature, fan, lan1, and lan2 rear panel two 9-pin d-sub intelligent system module remote monitoring cpu/system fan speed, cpu/system temperature, motherboard voltage (only selected advantech mbs/cpu cards with susiaccess installed can fully enabled these functions, check with advantech local rep. for detailed information.) environment operating non-operating temperature 0 ~ 40 c (32 ~ 104 f) -40 ~ 70 c (-40 ~ 156 f) humidity 10 ~ 95% @ 40 c, non-condensing 10 ~ 95% @ 60 c, non-condensing vibration (5 ~ 500 hz) 1 grms 2 g shock 10 g (with 11 ms duration, half sine wave) physical characteristics dimensions (w x h x d) 482 x 88 x 525 mm (19" x 3.46" x 20.67") weight 13.7 kg (30.12 lb) * the usb ports do not operate if a main board without on-board usb 3.0 internal box header is installed. rohs compliant 2002/95/ec *note: motherboard and power supply are not included. front view rear view top view led indicators usb 3.0 x2 slim optical drive bay hot-swap hdd tray x4 front-accessible fan without opening top cover switch/buttons thumb screws single or redundant psu supported easy-to-maintain storage fan kit with thumb screw internal 2.5" x2 drive bays supports atx form factor motherboard intelligent system module case open switch new rear i/o bracket for low profle add-on cards all product specifications are subject to change without notice last updated : 29-may-2015 server-grade ipcs features
dimensions unit: mm [inch] hpc-7242 ordering information part number description HPC-7242MB-00XE without psu, with atx switch power supply options part number 80 plus grade wattage type input ps8-350fatx-xe bronze 350w single ac 100 ~ 240 v (full range) ps8-500u2-xe bronze 500w single ac 100 ~ 240 v (full range) rps8-500u2-xe bronze 500w (1+1) redundant ac 100 ~ 240 v (full range) rps8-700u2-xe bronze 700w (1+1) redundant ac 100 ~ 240 v (full range) optional accessories part number description 9662132020e black mobile hdd tray 1990021407t000 door flter spare parts part number description 96cb-satapower-6p1 sata power wire 6-pin to big 4-pin (for slim odd) 1950014302n001 special bracket for riser card aimb-rp3p8-12a1e rear i/o panel kit for low-profle add-on cards 1939000361 screw (should purchase 7 pcs) 1960034816n000 i/o bracket (should purchase 7 pcs) 1960019475t201 rear panel for low-profle 426.4 [16.79] 464.5 [18.29] 482 [18.98] 566.3 [22.30] 88.4 [3.48] 76.2 [3.00] 44.4 [1.75] 92 [3.62] 92 [3.62] 92 [3.62] 92 [3.62] 61.1 [2.41] 523.8 [20.62] 42.1 [1.66] www.advantech.com/products online download
|